Door Handle Replacement
Door handles may seem like something minor but if you aren't happy with the way they look or are finding them difficult to use, it's worth replacing them. Installing upvc door handle repairs on your door is simple if you have patience.
Modern door handles are equipped with cover plates that hide the screws for an attractive appearance. However, you'll have to attach them separately if your new handle does not have them attached already.
Remove the old handle
The door handle isn't only a decorative addition to your home it also serves as a safety feature that allows you to lock and unlock your door. However, as time passes the door handle could lose its grip, appear loose, or look old and worn. This is a sign that it's probably the time to replace your door handle.
One of the first signs that your door handle requires replacing is when it becomes difficult to operate. This is a problem because it means that you are unable to no longer lock or unlock your door, which could create an security risk to you and your family.
It's also recommended to replace your door handle when it's damaged or broken. A broken door handle is dangerous, especially for children and elderly family members who might struggle to open it. They could be trapped. Fortunately, it's fairly simple to fix a damaged door handle by simply replacing the handle that was broken.
Modern door handles are usually standard sizes and should be able to fit any door. If you're not sure whether the new door handle you're buying will fit, try removing the old one and measuring its housing holes. This will enable you to buy the right size door handle.
The most straightforward method to remove the door handle you have been using is to unscrew it from the door. Usually, a screwdriver is used. However some door handles have an outer cover plate that hides the mounting screws, so you'll need to pry off this to reach the screws underneath. After you have removed the old handle, make a note of the way in which the spindle is attached. This will assist you in aligning the new handle.
You can also remove the door handle by unscrewing the latch mechanism. You can make use of a screwdriver to take off the door handle. But, you'll have to locate the small latch which is located on the edge of the trim piece. After removing the latch, unscrew the handle and the strike plate. Then, you can remove the latch from the door's edge.
Take off the Strike Plate
You'll need to replace your latch plate when replacing the handle. This is the plate that is the one that holds the hole in which the door's latch hooks in when the door closes. The new handles will come with two latch plates: a rectangular and circular plate (see the image above which illustrates the components of the door handle). If your current latch plate is a rectangular shape, switch it to a circular one so that the latch hooks onto the strike plate in a manner that makes the handle easier to use.
The first step is to take off the screw holding the old latch plate. The screws can be very tight, and may require some force to loosen. It is helpful to get a second person to assist in this area if it is possible.
The latch plate should come out of the door once the screws have been removed. If the latch plate is stuck or doesn't move, use a small hammer to scrape the edges. This will sometimes free the plate.
Now you can prepare the new strike plate to be installed. With the wood screws that came with your new handles, attach the latch plate onto the inside of the doorjamb. Be careful not to tighten too much the screws, as this can damage the strike plate.
If you're not sure whether the latch plate is in the correct position, shut and open the door to check whether it latches and closes correctly. If it doesn't, you will need to adjust the strikeplate up or down or forward or back until the door locks correctly.
If the door continues to move or jiggles, you may have to enlarge your latch hole on the strike plate. This is more common on older doors. It can be caused by wear and tear hinges that aren't narrow, the wrong size latch or damaged strike plate. If this is the case then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.
Take off the Latch
The latch is an angled metal piece that slides into and out of a hole on the inside of your door. When you turn the handle, it pushes the latch forward, allowing you to open the door. It also hooks into an opening in the frame of the door to keep your door shut. If your door wobbles when you close, an upgrade to the latch could be the only thing needed to fix the issue.
The screws that support the door latch are hard to spot, but you can usually use a screwdriver to make a small hole in the trim plate, and then pull the latch off. After removal of the trim plate you should be able to take off the latch and the bolts that hold it and the spindle.
If the latch won't come out it is suggested to use an old-fashioned paper clip or tool to spring it loose from the handle mechanism. Place the item in the recessed latch slot and gently turn or jiggle it until you feel the handle and latch begin to split. You may need to repeat this procedure several times before you are able to pull the latch out.
You should be able to slide the new latch into its slot without problems after you have removed the old one. Use the new screws to attach the latch to the strike plate or door frame. Make sure that it is correctly positioned in the slot, and aligned with the screw chambers.
Before installing the new handle, be sure to measure your current backset (the distance from the centre of the big hole on the front surface of the door to the edge). Verify that the size of the latch of the new handle is equal to the measurement.
If you're replacing the latch or handle, or if your old lock cylinder is damaged, then you'll need an entirely new one. If you're not replacing the locks, however, a new latch will fit into your existing recess, and work with your current keys. Be sure to choose an entry point with rectangular cover plates that match the handles you have.
Take off the cover plate
You can replace your old door handles with a modern rose and lever designs to improve the look of your home. You can buy complete sets of escutcheons, privacy adaptors, escutcheons, and escutcheons.
To replace an internal door handle, remove the cover plate (or rose), which protects the screws and the inner mechanism. Utilize a flathead to take off the plate. It could have an opening on one edge or be secured by pins.
Remove the screw holding the handle inside and set it aside once the cover plate has been removed. Remove the screws that hold both the outer and inner plates. You can loosen them with the help of a Philips Screwdriver. Take the inner plates and latch from the door. Set them aside.
Most doors have gaps between the jamb of the door and the inside edge of the frame, which allows for a handle, however not all do. If yours does not, you will need to drill a hole through the door. This is the same process as opening a door locked however you'll have to be extra cautious not to scratch the frame or door.
After drilling the holes, you'll need to install new door knob screws. Choose the same size as the old screws to avoid getting a handle too tight or loose. Installing a new strike rod and latch is also necessary. These are not included in the majority of door handle sets.
If you're looking for a high-quality replacement for your interior door handle set, try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit product and has been praised with hundreds of five-star reviews. It's a great option for replacing worn out or damaged interior door hardware on your Chevy.